Accurate, clear and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or scanner.
Present service manual Fujitsu fi-614PR fi-6230 fi-6130 fi-6240 fi-6140 contain clear instructions and procedures on how to fix the problems occurring in your equipment.
The information contained in this repair manual is necessary for the repair, but also prevention, resulting in a longer life of your equipment.
Format of the manual: PDF, makes it easy to navigate, instant download and print. English language.
Table of contents:
Chapter 1. OVERVIEW
1-1 Specification
1-1-1 Features
1-1-2 Scanner Specifications
1-1-3 Environmental Specifications
1-1-4 Appearance
1-1-5 Outer Dimensions
1-1-6 Document Specifications
1-1-7 Multi feed Detection Condition
1-2 Scanner Configuration
1-2-1 ADF Unit
1-2-2 Reading Station
1-2-3 Controller
1-2-4 Electric Component Block Diagram
Chapter 2. DESCRIPTION OF SCANNER OPERATION
2-1 Unpacking the scanner
2-2 Installing the scanner
2-2-1 For safety installation
2-2-2 Installation
Chapter 3. MAINTENANCE PARTS
3-1 BASE UNIT
3-2 BASE ASSY
3-3 INVERTER
3-4 LAMP
3-5 US SENSOR FX (Multifeed detection)
3-6 OPT UNIT
3-7 BW MOTOR
3-8 GUIDE P ASSY (Sheet Guide)
3-9 PICK MOTOR ASSY
3-10 PICK MOTOR
3-11 PICK SHAFT ASSY
3-12 SWITCH (ADF open detection)
3-13 UPPER UNIT
3-14 UPPER ASSY
3-15 ADF MOTOR
3-16 (Reserved)
3-17 (Reserved)
3-18 (Reserved)
3-19 US SENSOR RV (Multifeed detection)
3-20 SENSOR EMP (Paper empty detection)
3-21 PANEL PCA
3-22 BR SHAFT ASSY
3-23 CONTROL PCA
3-24 (Reserved)
3-25 STACKER UNIT
3-26 CHUTER UNIT (ADF paper chute)
3-27 AC ADAPTER
3-28 AC CORDSETS
3-29 USB CABLE
3-30 FB TOP COVER
3-31 FB MOTOR UNIT
3-32 FB MOTOR
3-33 OPT BOX UNIT
3-34 (Reserved)
3-35 (Reserved)
3-36 (Reserved)
3-37 CR CABLE
3-38 DOC COVER ASSY
3-39 JOINT PCA
6-40 (Reserved)
Chapter 4. TROUBLESHOOTING
4-1 Operation Panel Sequence at Power-on
4-2 Temporary errors and Alarm detection algorithm
4-2-1 Temporary errors
4-2-2 Alarms
4-2-3 Error Recovery Guide
4-3 Troubleshooting
4-3-1 Scanner is not turned ON (Display of the operator panel goes out)
4-3-2 Scanning does not start
4-3-3 Scanned image is distorted
4-3-4 Resolution is not satisfactory or tone error is too large
4-3-5 Too much jitter on scanned image with FB scanning fi-6240/fi-6230
4-3-6 Scanned image is misaligned with FB scanning fi-6240/fi-6230
4-3-7 Scan magnification factor abnormal with FB scanning fi-6240/fi-6230
4-3-8 Too much jitter on scanned image with ADF scanning
4-3-9 Scanned image is misaligned with ADF scanning
4-3-10 Scan magnification factor abnormal with ADF scanning
4-3-11 Vertical streaks appear in scanned image
4-3-12 When calibrating white of scanned image
4-3-13 Frequent “J1: paper jam” error at scanner section
4-3-14 Frequent “J2: multi feed error”
4-3-15 Error detection of “U4: Scanner Cover open”
4-3-16 Error detection of “No paper on the ADF paper chute (Chuter Unit)”
4-3-17 Frequent “U0: Shipping lock error” or “E0: Carrier drive alarm”
4-3-18 “E1/E2/E3: Optical alarm”
4-3-19 “E6: Operator panel alarm”
4-3-20 “E7: EEPROM alarm”
4-3-21 “E8: SCSI alarm”
4-3-22 “E9: Image memory alarm”
4-3-23 “F4: Background changeover unit alarm”
4-3-24 “C0: LSI alarm”
4-3-25 “H0/H8: Motor alarm”
4-3-26 “Lamp alarm”
4-3-27 “L6: US sensor alarm”
4-3-28 “F: ROM sum check alarm”
4-3-29 Driver error
4-3-30 “Abnormal command”
4-3-31 “Interface alarm”
4-3-32 Frequent “J1: paper jam” error at Imprinter (with Imprinter installed) fi-6140/fi-6130
4-3-33 Error detection of “U5:Imprinter cover open” (with Imprinter installed) fi-6140/fi-6130
4-3-34 Imprinter does not initially operate (with Imprinter installed) fi-6140/fi-6130
4-3-35 “U6: No print cartridge” (with Imprinter installed) fi-6140/fi-6130
4-3-36 “H6: Imprinter fuse blown” (with Imprinter installed) fi-6140/fi-6130
4-3-37 “A0: Imprinter control board alarm” (with Imprinter installed) fi-6140/fi-6130
“A1: Imprinter communication timeout” (with Imprinter installed) fi-6140/fi-6130
“A2: Ink head alarm” (with Imprinter installed) fi-6140/fi-6130
“A3: Imprinter EEPROM alarm” (with Imprinter installed) fi-6140/fi-6130
“A4: Imprinter ROM alarm” (with Imprinter installed) fi-6140/fi-6130
4-3-38 No printing / Printed letters are distorted (with Imprinter installed) fi-6140/fi-6130
4-3-39 Print form is dirty (with Imprinter installed) fi-6140/fi-6130
4-3-40 Printing is interrupted in process (with Imprinter installed) fi-6140/fi-6130
4-3-41 Frequent “J0: paper jam” (paper protection function) fi-6140/fi-6240
Chapter 5. DISASSEMBLY/ASSEMBLY
5-1 For the safety operation
5-2 Periodic Maintenance
5-3 Cleaning
5-3-1 OPT Unit (common to ADF front/backside and Flatbed)
5-3-2 Glass inside of Base Unit
5-3-3 Glass inside of Upper Unit
5-3-4 Glass inside of Flatbed fi-6240/fi-6230
5-3-5 White reference inside of Base Unit
5-3-6 White reference inside of Upper Unit
5-4 Maintenance tool
5-5 Parts that should not be Disassembled
5-6 (Reserved)
5-7 Removing Flatbed fi-6240/fi-6230
5-8 Chuter Unit (ADF Paper Chute), Stacker Unit
5-8-1 Chuter Unit (ADF Paper Chute)
5-8-2 Stacker Unit fi-6140/fi-6130
5-9 Base Unit
5-9-1 Base Unit
5-9-2 Base ASSY
5-9-3 Inverter (for front side scanning)
5-9-4 Lamp (for front side scanning)
5-9-5 US Sensor FX (Multifeed detection)
5-9-6 OPT Unit (for front side scanning)
5-9-7 BW Motor
5-9-8 Guide P ASSY (Sheet Guide)
5-9-9 PICK Motor ASSY
5-9-10 PICK Motor
5-9-11 PICK Shaft ASSY
5-9-12 Switch (ADF open detection)
5-10 Upper Unit
5-10-1 Upper Unit
5-10-2 Upper ASSY
5-10-3 ADF Motor
5-10-4 OPT Unit (for backside scanning)
5-10-5 Inverter (for backside scanning)
5-10-6 Lamp (for backside scanning)
5-10-7 US Sensor RV (Multifeed detection)
5-10-8 Sensor EMP (Paper empty detection)
5-10-9 Panel PCA
5-10-10 BR Shaft ASSY
5-10-11 Top Cover
5-11 Control PCA
5-12 Flatbed
5-12-1 FB Top Cover fi-6240/fi-6230
5-12-2 FB Motor Unit fi-6240/fi-6230
5-12-3 FB Motor fi-6240/fi-6230
5-12-4 OPT Box Unit fi-6240/fi-6230
5-12-5 OPT Unit fi-6240/fi-6230
5-12-6 Inverter fi-6240/fi-6230
5-12-7 Lamp fi-6240/fi-6230
5-12-8 CR Cable fi-6240/fi-6230
5-12-9 Document Cover fi-6240/fi-6230
5-12-10 Joint PCA fi-6240/fi-6230
Chapter 6. ADJUSTMENT/SETTINGS
6-1 Maintenance mode
6-1-1 Activating the Maintenance mode
6-1-2 Maintenance mode #1: Paper feeding / Sensor / Background changeover test
6-1-3 Maintenance mode #2: Main scanning / Sub-scanning magnification adjustment
6-1-4 Maintenance mode #3: Offset adjustment
6-1-5 Maintenance mode #4: White level adjustment
6-1-6 Maintenance mode #5: Consumable counter display and reset
6-1-7 Maintenance mode #6: Miscellaneous information display
6-1-8 Maintenance mode #7: EEPROM data restore
6-2 Saving EEPROM data
Chapter 7. BASIC OPERATION AND DAILY CARE
7-1 Basic Operation
7-1-1 Turn ON/OFF the Scanner
7-1-2 Loading Documents on the ADF for Scanning
7-1-3 Loading Documents on the Flatbed for Scanning fi-6240/fi-6230
7-2 Daily Care
7-2-1 Cleaning the ADF
7-2-2 Cleaning the Flatbed fi-6240/fi-6230
7-3 Replacing the consumables
7-3-1 Consumables
7-3-2 Checking and Resetting the Consumables Counters
7-3-3 Brake roller replacement
7-3-4 Pick roller replacement
Chapter 8. IMPRINTER (Optional)
8-1 Imprinter Specifications
8-1-1 Printing Functions
8-1-2 Environmental Specifications
8-1-3 Appearance
8-1 Imprinter Operation
8-2-1 Imprinter Operation
8-2-2 Circuit Block Diagram
8-3 Unpacking and Installation of Imprinter
8-3-1 Unpacking the Imprinter
8-3-2 Installing the Imprinter
8-3-3 Loading the Print cartridge
8-3-4 Operation Test
8-4 Maintenance Parts for the Imprinter
8-4-1 SENSOR
8-4-2 IMP CT
8-4-3 IMP JNT
8-4-4 PR HARNESS
8-4-5 IM FELT
8-4-6 LF MOTOR
8-4-7 IM HOLDER ASSY3
8-4-8 IM HOLD LEVER3
8-4-9 FPC CABLE
8-4-10 IM PINCH ASSY3
8-4-11 IM LOCK LEVER
8-4-12 SWITCH (Cover open detection)
8-4-13 GUIDE SHEET
8-4-14 PAPER GUIDE3
8-5 Troubleshooting
8-6 Disassembly/Assembly
8-6-1 For Safety operation
8-6-2 Maintenance tool
8-6-3 (Reserved)
8-6-4 Removing Imprinter
8-6-5 IM HOLD LEVER3
8-6-6 IM PINCH ASSY3
8-6-7 IMP JNT
8-6-8 IM HOLDER ASSY3/FPC CABLE
8-6-9 IMP CT
8-6-10 SENSOR
8-6-11 SWITCH (Cover open detection)
8-6-12 LF MOTOR
8-6-13 PR HARNESS
8-6-14 IM FELT
8-6-15 IM LOCK LEVER
8-6-16 GUIDE SHEET
8-7 Adjustment/Settings
8-8 Basic Operation and Daily Care of the Imprinter
8-8-1 Setting The Print Position
8-8-2 How to Use the Paper Guides
8-8-3 Print Setup
8-8-4 Removing Jammed Documents
8-9 Cleaning and Consumables
8-9-1 Cleaning the Print Cartridge
8-9-2 Cleaning the Imprinter
8-9-3 Cleaning the Imprinter Rollers
8-9-4 Replacing the Print Cartridge
Appendix 1 Screws
Appendix 2 Emulation Mode.
Fujitsu fi614PR fi6230 fi6130 fi6240 fi6140 Fujitsufi614PR Fujitsufi6230 Fujitsufi6130 Fujitsufi6240 Fujitsufi6140