Graphtec CE7000-40/CE7000-60/CE7000-130/CE7000-160/CE7000-130AP Service Manual and Parts Catalog


Accurate and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or scanner.
Present service manual and parts catalog Graphtec CE7000-40/CE7000-60/CE7000-130/CE7000-160/CE7000-130AP contain clear instructions and procedures on how to fix the problems occurring in your equipment.
Format of the manual: PDF, makes it easy to navigate, instant download and print. English language.
Table of contents:

1. INTRODUCTION
1.1 Main Specifications
1.1.1 CE7000 Main Specifications
1.1.2 CE7000-130AP Main Specifications
1.2 External Dimensions
1.2.1 CE7000 External Dimensions
1.2.2 CE7000-130AP External Dimensions
1.3 Option & Supply Parts
1.3.1 CE7000 Option & Supply Parts
1.3.2 CE7000AP Supply Parts

2. SETUP
2.1 Confirming the standard accessory
2.1.1 Standard accessory for the CE7000-40/60/130/160
2.1.2 Standard accessory for the CE7000-130AP
2.2 Assembling stand and basket to the Plotter
2.2.1 Assembling stand for the CE7000-60
2.2.2 Assembling the stand for CE7000-130/160
2.2.3 Assembling the stand for CE7000-130AP
2.2.4 Installing the optional basket for CE7000-60
2.2.5 Installing the optional basket for CE7000-130/160

3. PARTS NAMES AND FUNCTIONS
3.1 Parts Names and Functions
3.1.1 Parts Names and Functions for CE7000-40
3.1.2 Parts Names and Functions for CE7000-60
3.1.3 Parts Names and Functions for CE7000-130/160
3.1.4 Parts Names and Functions for CE7000-130AP
3.2 Attaching a Tool
3.2.1 Attaching a Tool for CE7000-40/60/130/160
3.2.2 Attaching a Tool and a Pen for CE7000-130AP

4. OPERATIONS
4.1 OPERATIONS for the CE7000-40/60/130/160
4.1.1 Control Panel for the CE7000-40/60/130/160
4.1.2 Menu tree for CE7000-40/60/130/160
4.2 OPERATIONS for the CE7000-130AP
4.2.1 Control Panel for the CE7000-130AP
4.2.2 Menu tree for CE7000-130AP

5. RECOMMENDED PARTS LIST
6. LIST OF TOOLS
6.1 Tools
6.2 Greasing And Gluing Points

7. DISASSEMBLY AND REASSEMBLY
7.1 Exterior Parts
7.1.1 Replacing the Right Side Cover
7.1.2 Replacing the Left Side Cover
7.1.3 Replacing the Control Panel Assembly
7.1.4 Replacing the Center Cover
7.1.5 Replacing the Front Guide
7.1.6 Replacing the Rear Guide
7.1.7 Replacing the Rear Writing Panel
7.1.8 Replacing the Front Writing Panel Assembly
7.1.9 Replacing the Fan Cover
7.1.10 Replacing the Pen Block Cover
7.1.11 Replacing the Push Roller
7.1.12 Replacing the Cutting Mat
7.2 Internal Parts
7.2.1 Replacing the Rear Media Sensor
7.2.2 Replacing the Front Media Sensor
7.2.3 Replacing the Registration Mark Sensor
7.2.4 Replacing the Control Panel Board
7.2.5 Replacing the LCD
7.2.6 Replacing the Pen Block
7.2.7 Replacing the Y-belt
7.2.8 Replacing the Push Roller Sensor Board
7.2.9 Replacing the Y-relay Board
7.2.10 Replacing the Cam Sensor board
7.2.11 Replacing the Y-motor
7.2.12 Replacing the X-motor
7.2.13 Replacing the Main Board
7.2.14 Replacing the Fan
7.2.15 Replacing the Drive Roller Shaft for CE7000-40/60
7.2.16 Replacing the Drive Roller shaft for CE7000-130/130AP/160
7.2.17 Replacing the Y Flexible Cable
7.2.18 Detaching the Push Roller assembly
7.2.19 Replacing the Push Roller base
7.2.20 Replacing Power Supply Board
7.3 Belt Tension Adjustments
7.3.1 Y-Belt Tension Adjustment
7.3.2 Y-Drive Belt Tension Adjustment
7.3.3 X-Drive Belt Tension Adjustment
7.4 Confirming the cable wiring

8. Electrical Adjustment
8.1 List of Items Requiring Readjustment
8.2 Flowchart of the Adjustment Sequence
8.2.1 When the main board was replaced (Normal procedure)
8.2.2 When the main board was replaced (The adjustment values could not copy.)
8.2.3 When the pen block was replaced
8.2.4 When the Rear or Front X Media sensor was replaced
8.2.5 When the registration mark sensor was replaced
8.2.6 When the cam sensor board was replaced
8.2.7 When the 2nd pen of holder or station was replaced
8.2.8 When the optional push roller was installed
8.2.9 When the gird roller was replaced
8.3 DIP Switch Settings
8.4 Explanation of the Values of the Main Board Settings
8.5 Confirming the version of firmware
8.6 Upgrading the System Firmware
8.7 Clearing the NOV-RAM
8.8 Selecting Display Language & Length Unit
8.9 Copying the Adjustment value form the SUB-NVRAM
8.10 How to Enter the Adjustment Menu
8.11 Adjusting the Pen Force
8.11.1 Inputting the pen force from the recorded value
8.11.2 Adjusting the pen force from the measured force
8.12 Adjusting the Distance Accuracy
8.12.1 Inputting the distance accuracy from the recorded value
8.12.2 Adjusting the distance accuracy from the measured distance
8.13 Adjusting the Registration Mark Sensor Sensitivity
8.14 Adjusting the Offset of Registration Mark Sensor
8.14.1 Inputting the registration mark sensor offset position from the recorded values
8.14.2 Adjusting the registration mark sensor offset position from the measured values
8.15 Adjusting the X Media Sensor Position
8.15.1 Inputting the X Media Sensor Position from the recorded value
8.15.2 Adjusting the X Media Sensor Position
8.16 Adjusting the 2nd Pen Exchange position (CE7000-130AP)
8.16.1 Inputting the 2nd Pen Exchange position from the recorded value
8.16.2 Adjusting the 2nd Pen Exchange position
8.17 Adjusting the Spacing Between Tool 1 and Tool 2 (CE7000-130AP)
8.17.1 Inputting the Spacing Between Tool 1 and Tool 2 from the recorded value
8.17.2 Adjusting the Spacing Between Tool 1 and Tool 2
8.18 Setting the Number of Push Rollers (CE7000-130/160)
8.19 Back up the adjustment value to the SUB-NVRAM

9. TROUBLESHOOTING
9.1 The Plotter is Turned On But Doesn’t Operate
9.2 Media Loading Operations
9.3 Cutting Operations
9.4 Print & Cut Operation
9.5 USB connection
9.6 Error Messages
9.6.1 Hardware Error Messages
9.6.2 Error Messages in GP-GL Command Mode
9.6.3 Error Messages in HP-GL Emulation Mode
9.6.4 Error Messages on ARMS
9.6.5 Other Error Messages
9.6.6 Warning Messages
9.7 Service mode
9.7.1 Sensor & Panel Switch Test Mode
9.7.2 Printing the Setting of the Plotter
9.7.3 Printing the Test Pattern
9.7.4 Confirm the Cutting Data
9.7.5 Self Diagnostic Test
9.7.6 Registration Mark Sensor Test
9.7.7 Clear Setup Mode

10. PARTS LIST
10.1 Outer Casing CE7000-40/60
10.2 Outer Casing CE7000-130/130AP/160
10.3 Additional Outer Casing CE7000-130AP
10.4 Control Panel
10.5 Pen Block CE7000-40/60/130/160
10.6 Pen Block CE7000-130AP
10.7 Main Electrical Parts CE7000-40/60
10.8 Main Electrical Parts CE7000-130/130AP/160
10.9 X Drive Parts CE7000-40/60
10.10 X Drive Parts CE7000-130/130AP/160
10.11 Y Drive Part CE7000-40/60
10.12 Y Drive Part CE7000-130/130AP/160
10.13 Y Slider Part CE7000-40/60
10.14 Y Slider Part CE7000-130/130AP/160
10.15 Stand for CE7000-60 (ST0118)
10.16 Stand for CE7000-130/160 (ST0119/0120)
10.17 Stand for CE7000-130AP (ST0121)
10.18 Basket for CE7000-60/130/160 (PG0103/104/105)
10.19 Details of Basket Base Bracket
10.20 Roll Media Stoker for CE7000-40
10.21 Labels
10.22 Standard Accessories

11. WIRING DIAGRAMS
12 Target electrical component for WEEE instruction

CE7000-40 CE7000-60 CE7000-130 CE7000-160 CE7000-130AP CE700040 CE700060 CE7000130 CE7000160 CE7000130AP 700040 700060 7000130 7000160 7000130AP Graphtec CE7000-40 Graphtec CE7000-60 Graphtec CE7000-130 Graphtec CE7000-160 Graphtec CE7000-30AP Graphtec E700040 Graphtec CE700060 Graphtec CE7000130 Graphtec CE7000160 Graphtec CE7000130AP Graphtec 700040 Graphtec Graphtec 700060 Graphtec 7000130 Graphtec 7000160 Graphtec 7000130AP