Fuji Xerox ApeosPort-IV C5570 C4470 C3370 C2270 Xerox DocuCentre-IV C5570 C4470 C3370 C2270 Service Manual and Parts Catalog


Accurate, clear and concise text, combined with detailed illustrations, lists of error code, instruction and diagrams, guide you through procedure of repair, remediate, maintenance and adjustments your copier, printer or scanner.
Present service manual and parts catalog Fuji Xerox ApeosPort-IV C5570 C4470 C3370 C2270 Xerox DocuCentre-IV C5570 C4470 C3370 C2270 contain clear instructions and procedures on how to fix the problems occurring in your equipment.
The information contained in this repair manual is necessary for the repair, but also prevention, resulting in a longer life of your equipment.
Format of the manual: PDF, makes it easy to navigate, instant download and print. English language.
To see what contain, please read table of contents:

Chapter 1. SERVICE CALL PROCEDURE
1.1 Before Starting the Servicing
1.2 Service Call Procedure
1.3 Detailed Contents of the Service Call
1.4 TRIM Check List
1.5 Periodic Replacement Parts/Consumables List

Chapter 2. TROUBLESHOOTING

Chapter 3. IMAGE QUALITY TROUBLESHOOTING
3.1 Introduction
3.1.1 Contents of Chapter 3
3.1.2 Test Pattern
3.1.3 Image Quality Troubleshooting
3.1.4 Test Pattern
3.2 Image Quality Troubleshooting
3.2.1 Image Quality Entry FIP
Using This Image Quality Troubleshooting
IQ-1 White Streaks in SS Direction (Dirt, Scratches)
IQ-2 IN-OUT Density Difference
IQ-3 Chip/Half Chip Blanks
IQ-4 SLED Transfer Failure
IQ-5 Tapes Not Peeled
IQ-6 Charging Roll Pitch White Stripes – 1
IQ-7 Charging Roll Pitch White Stripes – 2
IQ-8 Photoreceptor Pitch Color Stripes
IQ-9 Background on Coated Paper
IQ-10 Toner Droplet Contamination
IQ-11 Smear on Heavyweight
IQ-12 Rough Black
IQ-13 Moist Paper Transfer Failure
IQ-14 Toner Contamination at Lead/Tail Edge
IQ-15 Multi Color Transfer Failure
IQ-16 Tail Edge Transfer Failure
IQ-17 MWS (Side 2) (Micro White Spots)
IQ-18 Color Stripes
IQ-19 Wetting
IQ-20 White Streaks in Process Direction/Dropping Density (XERO/CLN)
IQ-21 Moist Paper Wrinkles (Fuser)
IQ-22 Lines on Coated Paper (EXIT)
IQ-23 Caterpillar Mark (Transfer)
IQ-24 Background (IPS)
IQ-25 Light Ink Support (IPS)
IQ-26 Highlight Density Reproduction (NVM Darken +3) (IPS)
IQ-27 Highlight Density Reproduction (NVM Lighten +3) (IPS)
IQ-28 Bleed on Tracing Paper (IPS)
IQ-29 Dual Color Copy (IPS)
IQ-30 CVT Streaks (IPS)
IQ-31 Copy: Gradation Jump in Text & Photo (IPS)
IQ-32 Scan: Smeared Text, JPEG Mosquito Noise (IPS)
IQ-33 Moire In Text Mode (Fine) BW Scan/Fax For 133 lpi Originals (IPS)
IQ-34 Copy: Bleed on 2 Sided Document (IPS)
IQ-35 Copy: Platen Background (IPS)
IQ-36 White Streaks Due to Trimmer Jam (DEVE)
IQ-37 Heat Haze/Mock Heat Haze
IQ-38 Poor Reproducibility of Fine Lines (IOT Image Quality)
IQ-39 Unevenness Correction Within Image Area (IOT Image Quality)
3.2.2 Notes on Image Quality Restrictions
3.2.3 Cycle Table

Chapter 4. DISASSEMBLY/ASSEMBLY AND ADJUSTMENTS
4.1 Introduction
4.1 Introduction
4.2 Disassembly/Assembly
1 IIT
REP 1.1.1 Platen Cushion
REP 1.2.1 Platen Glass
REP 1.2.2 W85 Control Panel
REP 1.2.3 USB Cable
REP 1.3.1 W85 Console Assembly
REP 1.4.1 CCD Lens Assembly
REP 1.5.1 Front/Rear Carriage Cable
REP 1.5.2 (SCC) Carriage Motor
REP 1.6.1 LED Lamp PWB
REP 1.6.2 LED Lamp Wire Harness
REP 1.6.3 Light Guide
REP 1.7.1 (SCC) IIT Trans PWB
REP 1.8.1 USB Connector
2 LPH
REP 2.1.1 (SCC) LPH Unit (Y, M, C, K)
REP 2.2.1 LPH Cable Assembly (2270/3370)
REP 2.2.2 LPH Cable Assembly (4470/5570)
3 Drive
REP 3.2.1 Main Drive Assembly (2270/3370)
REP 3.2.2 Main Drive Assembly (4470/5570)
REP 3.3.1 Drum/Deve Drive Assembly (2270/3370)
REP 3.3.2 Drum/Deve Drive Assembly (4470/5570)
5 Development
REP 5.1.1 Toner Dispense Motor Assembly
REP 5.2.1 Developer Housing Assembly (Y, M, C, K)
REP 5.2.2 Developer
REP 5.3.1 LVPS (Deve)
6 Transfer
REP 6.1.1 IBT Belt Cleaner Assembly
REP 6.1.2 IBT Belt Unit
REP 6.2.1 (SCC) HVPS (1st/2nd/DTC)
REP 6.3.1 IBT Belt
REP 6.3.2 TR0 Seal
7 Fuser
REP 7.1.1 (SCC) Fuser
8 Xerographic
REP 8.1.1 Drum
REP 8.1.2 Erase Lamp Unit (K)
REP 8.1.3 Erase Lamp Unit (Y, M, C)
REP 8.2.1 (SCC) Agitator Motor Assembly
9 Tray 1 Feeder/Tray 1
REP 9.3.1 (SCC) Tray 1 Feeder Assembly
REP 9.5.1 Tray 1 Feed/Retard/Nudger Roll
10 Tray Module (3T)
REP 10.1.1 (SCC) Tray 2 Feeder Assembly
REP 10.1.2 (SCC) Tray 3 Feeder Assembly
REP 10.1.3 (SCC) Tray 4 Feeder Assembly
REP 10.4.1 Tray 2 Feed/Retard/Nudger Roll
REP 10.6.1 Tray 3 Feed/Retard/Nudger Roll
REP 10.8.1 Tray 4 Feed/Retard/Nudger Roll
REP 10.9.1 (SCC) Tray Module PWB
11 TRAY MODULE (TT)
REP 11.1.1 (SCC) Tray 3 Assembly
REP 11.1.2 (SCC) Tray 4 Assembly
REP 11.4.1 Tray Cable
REP 11.5.1 (SCC) Tray 4 Feeder
REP 11.6.1 (SCC) Tray 2 Feeder
REP 11.6.2 (SCC) Tray 3 Feeder
REP 11.8.1 Feed/Retard/Nudger Roll (Tray 2)
REP 11.10.1 Feed/Retard/Nudger Roll (Tray 3)
REP 11.12.1 Feed/Retard/Nudger Roll (Tray 4)
REP 11.17.1 (SCC) Tray Module PWB
13 MSI
REP 13.1.1 MSI Unit
REP 13.3.1 Feed/Retard/Nudger Roll
REP 13.5.1 (SCC) MSI Paper Size Sensor
14 L/H Cover
REP 14.1.1 L/H Cover Unit
REP 14.2.1 2nd BTR Assembly
REP 14.2.2 Duplex Assembly
15 Registration
REP 15.1.1 Registration Transport Assembly
17 Exit/OCT
REP 17.1.1 Exit/OCT 1 Assembly
REP 17.1.2 Exit 2 Assembly
18 Electrical
Disassembly/Assembly and Adjustment
REP 18.1.1 Opening/Closing the PWB Chassis Unit
REP 18.2.1 (SCC) BP PWB
REP 18.2.2 (SCC) MCU PWB
REP 18.2.3 (SCC) MD PWB
REP 18.3.1 (SCC) IH Driver PWB
REP 18.5.1 MOB ADC Assembly
REP 18.6.1 (SCC) HVPS (Deve/BCR)
19 Cover
REP 19.2.1 Top Cover
REP 19.3.1 Rear Lower Cover
35 ESS
REP 35.2.1 (SCC) Control Unit
51 DADF
REP 51.1.1 DADF
REP 51.1.2 DADF Platen Cushion
REP 51.2.1 DADF Front Cover
REP 51.2.2 DADF Rear Cover
REP 51.2.3 (SCC) DADF Feeder Assembly
REP 51.2.4 (SCC) DADF PWB
REP 51.3.1 (SCC) Left Counter Balance
REP 51.3.2 (SCC) Right Counter Balance
REP 51.4.1 (SCC) DADF Document Tray
REP 51.4.2 (SCC) Top Cover
REP 51.5.1 Harness Guide and Wire Harness
REP 51.5.2 DADF Regi Motor
REP 51.5.3 DADF Feed Motor
REP 51.8.1 Regi Chute
REP 51.8.2 Retard Chute
REP 51.9.1 Takeaway Roll
REP 51.9.2 Sensor Bracket
REP 51.12.1 Nudger Roll, Feed Roll
REP 51.14.1 Retard Roll
4.3 Adjustment
1 IIT
ADJ 1.6.1 Full/Half Rate Carriage Position Adjustment
ADJ 1.6.2 IIT Lead Edge Registration
ADJ 1.6.3 IIT Side Registration
ADJ 1.6.4 IIT Vertical/Horizontal Reduce/Enlarge
ADJ 1.6.5 DADF Original Detection Correction (Size Detection Auto-Correction)
ADJ 1.6.6 UI Touch Panel Origin Point Correction
18 ELECTRICAL
ADJ 18.1.1 IOT Lead Edge/Side Edge Registration
ADJ 18.1.2 Edge Erase Value Adjustment
ADJ 18.2.3 Things to take note when replacing Important Information Stored Components (ISC)161
ADJ 18.2.4 Firmware Version Upgrade(FX Only)
ADJ 18.2.5 Thin Line Correction Mode Adjustment
ADJ 18.2.6 LPH Exposure Amount Fine Adjustment
35 ESS
ADJ 35.1.1 Firmware Version Upgrade (Firmware Update Service System) (FX Only) 171
ADJ 35.2.1 Backup/Restore (Recovery)/Reproduce
ADJ 35.3.1 Parts Condition Assessment by ESS Status LED
ADJ 35.3.2 Special Booting
ADJ 35.3.3 Settings Recovery Tool (Freeware)
51 DADF
ADJ 51.1.1 DADF Lead-Skew Adjustment
ADJ 51.1.2 DADF Side Registration
ADJ 51.1.3 DADF Original Detection Correction
(Size Detection Auto-Correction)
ADJ 51.1.4 DADF Lead Edge Registration

Chapter 5. PARTS LIST
5.1 Introduction
5.1.1 How to Use the Parts List
5.1.2 Precautions
5.1.3 Plate Composition
5.1.4 Terminology and Symbols
5.1.5 Using Parts Navigation
5.2 Parts List
1. IIT
PL 1.1 Platen/IIT Cover
PL 1.2 W85 Control Panel, Platen Glass
PL 1.3 W85 Control Panel (1/2)
PL 1.4 CCD Lens Assembly
PL 1.5 Carriage Cable/Motor
PL 1.6 Full/Half Rate Carriage
PL 1.7 IIT Trans PWB and USB Hub PWB (Option)
PL 1.8 W85 Control Panel (2/2)
PL 1.9 S104 Control Panel and Mount
PL 1.10 S104 Control Panel
PL 1.11 S104 Front Panel
PL 1.12 S104 Display Panel
PL 1.13 IIT Heater/Wing Tray (Option)
PL 1.14 IC Card Reader,Voice Navi(Option)(FX Only)
2. LPH
PL 2.1 LPH (1/2)
PL 2.2 LPH (2/2)
3. DRIVE
PL 3.1 Drive (1/3)
PL 3.2 Drive (2/3)
PL 3.3a Drive 2270/3370 (3/3)
PL 3.3b Drive 4470/5570 (3/3)
4. NOHAD
PL 4.1 NOHAD Common
PL 4.2a NOHAD 2270/3370 (1/3)
PL 4.2b NOHAD 4470/5570 (1/3)
PL 4.3a NOHAD 2270/3370 (2/3)
PL 4.3b NOHAD 4470/5570 (2/3)
PL 4.4a NOHAD 2270/3370 (3/3)
PL 4.4b NOHAD 4470/5570 (3/3)
5. DEVELOPMENT
PL 5.1 Development (1/2)
PL 5.2 Development (2/2)
PL 5.3 4470/5570 HVPS (DEVE)
6. TRANSFER
PL 6.1 Transfer (1/2)
PL 6.2 Transfer (2/2)
PL 6.3 IBT Belt Unit (1/2)
PL 6.4 IBT Belt Unit (2/2)
7. FUSER
PL 7.1 Fuser
8. XEROGRAPHIC
PL 8.1 Xerographic (1/2)
PL 8.2 Xerographic (2/2)
9. TRAY1 FEEDRE/TRAY1
PL 9.1 Tray 1 Feeder/Tray 1
PL 9.2 Tray 1
PL 9.3 Tray 1 Feeder
PL 9.4 Tray 1 Feeder Assembly (1/2)
PL 9.5 Tray 1 Feeder Assembly 2/2)
10. TRAY MODULE (3T)/FAX
PL 10.1 Tray Module (3T)
PL 10.2 Tray 2/3/4
PL 10.3 Tray 2 Feeder Assembly (1/2)
PL 10.4 Tray 2 Feeder Assembly (2/2)
PL 10.5 Tray 3 Feeder Assembly (1/2)
PL 10.6 Tray 3 Feeder Assembly (2/2)
PL 10.7 Tray 4 Feeder Assembly (1/2)
PL 10.8 Tray 4 Feeder Assembly (2/2)
PL 10.9a 2270/3370 Electrical/Fax
PL 10.9b 4470/5570 Electrical/Fax
PL 10.10 Fax (FAXmini)
PL 10.11 Fax (FAX G4) (FX Only)
PL 10.12 Roller
PL 10.13 L/H Cover Assembly
PL 10.14 Cover
11. TRAY MODULE (TT)
PL 11.1 Tray 2/3/4 Assembly-TT
PL 11.2 Tray 2 Assembly-TT
PL 11.3 Tray 3 Assembly-TT
PL 11.4 Tray 4 Assembly-TT
PL 11.5 Tray 4 Paper Feed-TT
PL 11.6 Tray 2/3 Paper Feed-TT
PL 11.7 Tray 2 Feeder (1/2)-TT
PL 11.8 Tray 2 Feeder (2/2)-TT
PL 11.9 Tray 3 Feeder (1/2)-TT
PL 11.10 Tray 3 Feeder (2/2)-TT
PL 11.11 Tray 4 Feeder (1/2)-TT
PL 11.12 Tray 4 Feeder (2/2)-TT
PL 11.13 Left Cover Assembly-TT
PL 11.14 Tray 2/3/4 Front Support-TT
PL 11.15 Tray 2/3/4 Paper Size Sensor , Tray 3/4 Lift Gear-TT
PL 11.16 Drive-TT
PL 11.17 Electrical-TT
PL 11.18 Cover , Caster-TT
13. MSI
PL 13.1 MSI (1/5)
PL 13.2 MSI (2/5)
PL 13.3 MSI (3/5)
PL 13.4 MSI (4/5)
PL 13.5 MSI (5/5)
14. L/H COVER
PL 14.1 L/H Cover (1/2)
PL 14.2 L/H Cover (2/2)
PL 14.3 L/H Cover Assembly (1/2)
PL 14.4 L/H Cover Assembly (2/2)
PL 14.5 Duplex Assembly (1/2)
PL 14.6 Duplex Assembly (2/2)
15. REGISTRATION
PL 15.1 Registration (1/2)
PL 15.2 Registration (2/2)
17. EXIT/OCT
PL 17.1 Exit 1/OCT,Exit 2
PL 17.2 Exit 1/OCT
PL 17.3 Exit 2 (1/3)
PL 17.4 Exit 2 (2/3)
PL 17.5 Exit 2 (3/3)
PL 17.6 Side Tray Unit (1/2) (Option)
PL 17.7 Side Tray Unit (2/2) (Option)
18. ELECTRICAL
PL 18.1 PWB Chassis Unit (1/2)
PL 18.2a PWB Chassis Unit 2270/3370 (2/2)
PL 18.2b PWB Chassis Unit 4470/5570 (2/2)
PL 18.3 Electricl-IOT Rear
PL 18.4 GFI Chassis
PL 18.5 Electrical-Front/Right
PL 18.6a Electrical-Bottom 2270/3370
PL 18.6b Electrical-Bottom 4470/5570
PL 18.7 Wire Harness
PL 18.8 IOT/Tray Heater (Option)
19. COVER
PL 19.1 Cover (1/3)
PL 19.2 Cover (2/3)
PL 19.3 Cover (3/3)
35. ESS
PL 35.1 ESS (1/2)
PL 35.2 ESS (2/2)
PL 35.3 ESS Option
51. DADF
PL 51.1 DADF Accessory
PL 51.2 DADF Cover,PWB
PL 51.3 DADF Base Frame
PL 51.4 Document Tray,Top Cover
PL 51.5 DADF Motor,Wire Harness
PL 51.6 DADF Rear Belt,Solenoid
PL 51.7 DADF Front Belt
PL 51.8 Regi./Retard/Invert/Out Chute
PL 51.9 Roll,Sensor Bracket
PL 51.10 Document Tray
PL 51.11 Top Cover
PL 51.12 Upper Feeder
PL 51.13 Regi. Chute
PL 51.14 Retard Chute
PL 51.15 Invert Chute
PL 51.16 Out Chute
PL 51.17 Sensor Bracket
98. Screws
98.1 Screws
99. Adjustment/Consumables Area Code List
99.1 Paper
99.2 Environment
99.3 Consumables
99.4 Electrical Adjustment
99.5 Mechanical Adjustment
99.6 Originals
99.7 Accessories Related
99.8 Fax
99.9 DMP/Network Functions Related
5.3 Parts Navigation
Navi 1.1 Full System
Navi 2.1 Processor 1of2
Navi 2.2 Processor 2of2
Navi 2.3 IIT
Navi 2.4 3TM
Navi 2.5 DADF
Navi 2.6 TTM

Chapter 6. GENERAL
6.1 Specification
6.1.1 Product Name/Product Code/Serial No
6.1.2 Machine Dimension and Basis Weight
6.1.3 Installation Space
6.1.4 Levelness
6.1.5 Electrical Specification
6.1.6 Installation Environment
6.1.7 WarmUp
6.1.8 FCOT (First Copy Output Time)
6.1.9 Copy Speed
6.1.10 Paper Tray Capacity
6.1.11 Paper Size and Loading Orientation
6.1.12 Paper Weight
6.1.13 Automatic Duplex Print
6.1.14 Output Tray Capacity
6.1.15 Remaining Paper Amount Detection
6.1.16 Resolution/Gradation
6.1.17 Paper Selection
6.1.18 Image Loss
6.1.19 Maximum Printable Area
6.1.20 Alignment Specification
6.1.21 Controller Specification
6.1.22 Searchable PDF
6.1.23 FAX Specifications (FX Only)
6.1.24 Power States Specifications
6.2 Tools/Service Consumables/Consumables/Modification
6.2.1 Tools/Service Consumables
6.2.1.1 Tools
6.2.1.2 Service Consumables
6.2.2 Consumables
6.2.3 Modification
6.3.1 DC330 Input Component Check List
6.3.1 DC330 Input Component Check List
6.3.2 DC330 Output Component Check List
6.3.2 DC330 Output Component Check List
6.3.3 Analog Monitor Codes List
6.3.3 DC140 Analog Monitor Codes List
6.3.4 DC135 HFSI List
6.3.4 DC135 HFSI List
6.3.5 NVM 700 Controller
6.3.5 NVM 700 Controller
6.3.6 NVM 701,702 Controller
6.3.6 NVM 701,702,709 Controller
6.3.7 NVM 710 IISS
6.3.7 NVM 710 IISS
6.3.8 NVM 711 IISS
6.3.8 NVM 711 IISS
6.3.9 NVM 715 IISS
6.3.9 NVM 715 IISS
6.3.10 NVM 716 IISS
6.3.10 NVM 716 IISS
6.3.11 NVM 717 IISS
6.3.11 NVM 717 IISS
6.3.12 NVM 719 IISS
6.3.12 NVM 719 IISS
6.3.13 NVM 720 Controller
6.3.13 NVM 720 Controller
6.3.14 NVM 730~4 Controller
6.3.14 NVM 730~4 Controller
6.3.15 NVM 740_Mgr
6.3.15 NVM 740_Mgr
6.3.16 NVM 741_Drive_MQ
6.3.16 NVM 741_Drive_MQ
6.3.17 NVM 742_PH
6.3.17 NVM 742_PH
6.3.18 NVM 744_Fuser
6.3.18 NVM 744_Fuser
6.3.19 NVM 745_Xfe
6.3.19 NVM 745_Xfer
6.3.20 NVM 746_Xfer
6.3.20 NVM 746_Xfer
6.3.21 NVM 747_Xfer
6.3.21 NVM 747_Xfer
6.3.22 NVM 749_EXP
6.3.22 NVM 749_EXP
6.3.23 NVM 750_EXP
6.3.23 NVM 750_EXP
6.3.24 NVM 751_Xero_Clean
6.3.24 NVM 751_Xero_Clean
6.3.25 NVM 752_Procon
6.3.25 NVM 752_Procon
6.3.26 NVM 753_Procon
6.3.26 NVM 753_Procon
6.3.27 NVM 754_Procon
6.3.27 NVM 754_Procon
6.3.28 NVM 760_RegiCon
6.3.28 NVM 760_RegiCon
6.3.29 NVM 762_Deve
6.3.29 NVM 762_Deve
6.3.30 NVM 766_IOT Remote
6.3.30 NVM 766_IOT Remote
6.3.31 NVM 770 Controller
6.3.31 NVM 770 Controller
6.3.32 NVM 780 Controller
6.3.32 NVM 780 Controller
6.3.33 NVM 785 Controller
6.3.33 NVM 785, 790 Controller
6.3.34 NVM 790 Controller
6.3.34 NVM 790 Controller
6.3.35 NVM 800 Controller
6.3.35 NVM 800 Controller
6.3.36 NVM 803 ~809 Controller
6.3.36 NVM 803 ~809 Controller
6.3.37 NVM 810 Controller
6.3.37 NVM 810 Controller
6.3.38 NVM 820 Controller
6.3.38 NVM 820 Controller
6.3.39 NVM 823 Controller
6.3.39 NVM 823 Controller
6.3.40 NVM 825 Controller (FAX) (FX Only)
6.3.40 NVM 825 Controller (FAX) (FX Only)
6.3.41 NVM 826 Controller (FAXmini)
6.3.41 NVM 826 Controller (FAXmini)
6.3.42 NVM 830 Controller
6.3.42 NVM 830 Controller
6.3.43 NVM 840 Controller
6.3.43 NVM 840 Controller
6.3.44 NVM 848_849_850 Controller
6.3.44 NVM 848_849_850 Controller
6.3.45 NVM 855, 856, 857, 858, 859 Controller
6.3.45 NVM 855, 856, 857, 858, 859 Controller
6.3.46 NVM 860,870,880,900,910,920 Controller
6.3.46 NVM 860,870,880,900,910,920 Controller
6.4 Service Mode
6.4.1 How to Use the Service Mode
6.4.1.1 UI Diagnostic Mode Structure
6.4.1.2 How to Enter the CE Mode
6.4.1.3 How to Exit from the CE Mode
6.4.1.4 Printing Various Reports
6.4.1.5 Main Reports
6.4.2 How to Use the DC Codes
6.4.2.1 Check Request / Repair Request (EP Service):
DC003 (FX Only)
6.4.2.2 Used Parts Collection Notification: DC004 (FX Only)
6.4.2.3 EP-DX Settings (EP Service) (FX Only)
6.4.2.4 EP-BB Registration (EP Service)
6.4.2.5 DC129 System Registration Adjustment
6.4.2.6 DC131 NVM Read / Write
6.4.2.7 DC330 Component Control (IO Check)
6.4.2.8 DC140 Analog Monitor (IO Check)
6.4.2.9 DC355 Initialize Hard Disk
6.4.2.10 Software Options
6.4.2.11 Delete All Data
6.4.2.12 DC355 Hard Disk Failure Prediction Test (Sub System)
6.4.2.13 DC527 ADF Independent Operation (Sub System)
6.4.2.14 DC500 Blank Page Threshold Value (Sub System)
6.4.2.15 Signals Sending Test (Sub System/Fax Diagnostics)
6.4.2.16 Relay On/Off Test (Sub System/Fax Diagnostics)
6.4.2.17 DC612 Print Test Pattern
6.4.2.18 DC945 White Reference Adjustment (MAX Setup/IIT Calibration)
6.4.2.19 DC945 Optical Axis Correction (MAX Setup/IIT Calibration)
6.4.2.20 DC919 Color Balance Adjustment (MAX Setup)
6.4.2.21 DC924 TRC Adjustment (MAX Setup)
6.4.2.23 DC937 Procon On / Off Print (MAX Setup)
6.4.2.24 DC945 IIT Calibration (MAX Setup)
6.4.2.25 DC950 ATC Sensor Setup (MAX Setup)
6.4.2.26 DC949 Default Developer ATC Setup
6.4.2.27 DC991 Adjust Toner Density (MAX Setup/Tone Up / Down)
6.4.2.28 DC671 Regi Measurement Cycle (Registration)
6.4.2.29 DC673 Registration Control Sensor Check Cycle
6.4.2.30 DC675 Registration Control – Setup Cycle (Registration)
6.4.2.31 DC301 Initialize NVM
6.4.2.32 DC132 Machine ID / Billing Data (Adjustment / Others)
6.4.2.33 DC135 Initialize HFSI Counter (Adjustment / Others)
6.4.2.34 DC118 Jam Counter (Faults)
6.4.2.35 DC120 Failure Counter (Faults)
6.4.2.40 DC122 Shutdown History (Faults)
6.4.2.41 DC912 2nd Transfer Voltage Offset Adjustment
6.4.2.42 ESS-related Hardware Diagnostic Function
6.4.2.43 Software Upgrade (Device UI method)
6.4.2.44 Back Up Files / Restore Files
6.4.2.45 Delete All Certificates/Initialize Settings
6.4.2.46 UI (Control Panel) Self Diagnosis Function
6.5 Fax Related Information
6.5.1 Activity Report (User Mode)
6.5.2 Activity Report (CE Mode)
6.5.3 Protocol Monitor
6.5.4 Protocol Trace
6.5.4.1 Protocol Trace
6.5.4.2 FCF/FIF Description
6.5.4.3 Bit 7 Description
6.5.4.4 Bit 6 Description
6.5.4.5 Bit 16 Description
6.5.4.6 Bit 15 Description
6.5.4.7 Bit 14~11 Description
6.5.4.8 Bit 10 Description
6.5.4.9 Bit 9 Description
6.5.4.10 Bit 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112 Description
6.5.4.11 Bit 21~23 Description
6.5.4.12 Bit 19, 20 Description
6.5.4.13 Bit 17, 18 Description
6.5.4.14 Bit 31 Description
6.5.4.15 Bit 28 Description
6.5.4.16 Bit 27 Description
6.5.4.17 Bit 26 Description
6.5.4.18 Bit 25 Description
6.5.4.19 Bit 1, 3, 33~38, 47, 49~51, 53~55, 57, 59, 60, 62, 65~71, 73~75, 81~84, 87, 92~95, 97~99, 101,
102 Description
6.5.4.20 Bit 46 Description
6.5.4.21 Bit 45 Description
6.5.4.22 Bit 44 Description
6.5.4.23 Bit 43 Description
6.5.4.24 Bit 42 Description
6.5.4.25 Bit 41 Description
6.5.4.26 Bit 79 Description
6.5.4.27 Bit 78 Description
6.5.4.28 Bit 77 Description
6.5.4.29 Bit 76 Description
6.5.4.30 Bit 105~109 Description
6.5.5 Troubleshooting of ISDN Communication(FX only)
6.5.6 Super G3 Fax
6.5.6.1 Super G3 Fax
6.5.6.2 V.8 CM/JM Signal
6.5.6.3 V.8 Operation / Auto Send
6.5.6.4 V.8 Operation/Manual Send
6.5.6.5 Troubleshooting of Super G3 Fax

Chapter 7. WIRING DATA
7.1 Plug/Jack Location List
7.1.1 Plug/Jack Location List
7.1.2 Plug/Jack Location

Chapter 8. ACCESORIES
8.1 Accesories Table
8.2 Accessories (Direct Connection) (FX Only)
8.3 Installation of COPYLYZER 610N/650N (Direct Connection) (FX Only)
8.4 Installation of DocuLyzer/DocuLyzer NW (Direct Connection) (FX Only)
8.5 Installation of Coin Kit 5/Coin Kit 6N (Direct Connection)
(FX Only)
8.6 Connecting IC Card Reader (IBG Only)
8.7 Installation of IC Card Gate Pro 1.0 (Direct Connection)
8.8 Installation of EPnet-BOX type W1 (Direct Connection)
(FX Only)
8.9 Installation of EPnet-BOX type L (LAN) (Direct Connection) (FX Only)
8.10 Installation of EPnet-BOX type L (Modem) (Direct Connection) (FX Only)
8.11 Installation of Dispenser 2 (Direct Connection) (FX Only)
8.12 Installation of Coin Kit 8 (Direct Connection) (FX Only)
8.13 Installation of Attention Light II
8.14 Installation of Accessories via Adaptor-BOX (type D/S)(FX Only)
8.14.1 Accessories Connection Diagram (via Adaptor-BOX)
(FX Only)
8.14.2 Accessories (via Adaptor-BOX) (FX Only)
8.14.3 Accessories Installation Position & Required Products (via Adaptor-BOX) (FX Only) 18
8.14.4 Installation of Adaptor-BOX (type D/S) (FX Only)
8.14.5 Installation of DocuLyzer/ DocuLyzer NW (via Adaptor-BOX) (FX Only)
8.14.6 Installation of Dispenser 2 (via Adaptor-BOX) (FX Only)
8.14.7 Installation of COPYLYZER 610N/650N (via Adaptor-BOX) (FX Only)
8.14.8 Installation of Coin Kit 5 (via Adaptor-BOX) (FX Only)
8.14.9 Installation of IC Card Gate 1.0 (via Adaptor-BOX) (FX Only)
8.14.10 Installation of IC Card Gate Pro 1.0 (via Adaptor-BOX) (FX Only)
8.14.11 Installation of EPnet-BOX type W1 (via Adaptor-BOX)
(FX Only)
8.14.12 Installation of EPnet-BOX type L (LAN) (via Adaptor-BOX) (FX Only)
8.14.13 Installation of EPnet-BOX type L (Modem) (via Adaptor-BOX) (FX Only)
8.14.14 Installation of Foot Switch (via Adaptor-BOX) (FX Only)
8.14.15 Installation of Key Switch (via Adaptor-BOX) (FX Only)
8.14.16 Installation of Coin Kit 8 (FX Only)
8.15 Setting the Fax Send Billing at Coin Kit 8 (FX Only)
8.16 Installation of Internal Smart Card Reader
8.17 Installation of External Smart Card Reader

Chapter 9. INSTALLATION
9.1 Installation
9.1.1 ApeosPort-IV/DocuCentre-IV C5570/C4470/C3370/C2270 Installation Procedures 3
9.1.1.1 Installation of Main Unit
9.1.1.2 Printer Environment Setup
9.1.1.2.1 Printer Environment Setup Flow
9.1.1.2.2 Printer Cable Connection
9.1.1.2.3 Application Environment
9.1.1.2.4 Parallel Port Settings
9.1.1.2.5 USB Settings
9.1.1.2.6 TCP/IP (LPD/Port 9100) Settings
9.1.1.2.7 NetWare Settings
9.1.1.2.8 Microsoft Networks (SMB) Settings
9.1.1.2.9 Internet Printing (IPP) Settings
9.1.1.2.10 EtherTalk Settings
9.1.1.2.11 About Memory
9.1.1.3 Installation of Printer Driver
9.1.1.4 NetWare Environment Settings
9.1.1.5 Internet Printing Settings
9.1.2 Duplex Auto-Document Feeder (DADF)
9.1.3 Installation of Inner Output Tray (FX Only)
9.1.4 Installation of Side Tray Kit
9.1.5 Installation of Large Color Control Panel
9.1.5.1 Installation of Large Color Control Panel (1 of 4)
9.1.5.2 Installation of Large Color Control Panel (2 of 4)
9.1.5.3 Installation of Large Color Control Panel (3 of 4)
9.1.5.4 Installation of Large Color Control Panel (4 of 4)
9.1.6 Installation of Wing Kit
9.1.7 Installation of English Kit (FX Only)
9.1.8 Installation of HDD Extension Kit
9.1.9 Installation of Extension System RAM (1GB/512MB)
9.1.10 Installation of Gigabit Ethernet Port
9.1.11 Installation of Adobe PostScript 3 TC/SC Additional Fonts Kit Hardware
9.1.11.1 Installation of Adobe PostScript 3 TC/SC Additional Fonts Kit Hardware
9.1.11.2 PostScript Settings
9.1.12 Installation of Fax Kit 2 (Fax Mini)
9.1.12.1 Installation of Fax Kit 2 (Fax Mini)
9.1.12.2 Fax Mini Image Quality Adjustment
9.1.13 Installation of G3 Expansion Port
9.1.13.1 Installation of G3 Expansion Port (Fax) (FX Only)
9.1.13.2 Installation of G3 Expansion Port 2 (Fax Mini)
9.1.14 Installation of ISDN-G3/G4 Expansion Port (FX Only)
9.1.15 Installation of Outside Line/Extension Kit (FX Only)
9.1.16 Installation of Handset (FX Only)
9.1.17 Installation of Bypass Stamp Kit
9.1.18 Installation of Memory Card Reader
9.1.19 Installation of Image Compression Kit
9.1.19.1 Installation of Image Compression Kit
9.1.19.2 How to check the operation after installation
9.1.20 Installation of Image Extension Kit
9.1.21 Secure Watermark Kit
9.1.22 Installation of Parallel Port
9.1.23 USB Expansion Kit
9.1.25 Installation of Condensation Prevention Kit (Scanning Section Heater) (FX Only) 95
9.1.26 Installation of Condensation Prevention Kit
(Main Unit Heater) (FX Only)
9.1.27 Installation of Condensation Prevention Kit (Tray Heater) (FX Only)
9.1.28 Installation of ODOR Filter Kit
9.1.29 Installation of Odor Filter Kit for ApeosPort-IV/DocuCentre-IV 3370/2270
9.1.30 Installation of Tray Module
9.2 Removal
9.2 Removal
9.3 CentreWare Internet Services
9.3.1 Preparations
9.3.2 Installation Overview
9.3.3 IOT Settings
9.3.4 Settings Check
9.3.5 Web Browser Specifications
9.3.6 Ethernet Settings
9.3.7 Parallel Port Settings
9.3.8 USB Settings
9.3.9 EtherTalk Settings
9.3.10 SMB Settings
9.3.11 NetWare Settings
9.3.12 TCP/IP Settings
9.3.13 LPD Settings
9.3.14 SNMP Settings
9.3.15 IPP Settings
9.3.16 Port 9100 Settings
9.3.17 E-mail Settings
9.3.18 HTTP Settings
9.3.19 WebDAV Settings
9.3.20 Bonjour Settings
9.4 E-mail
9.4.1 E-mail Feature Overview
9.4.2 Preparations
9.4.3 Enabling Ports and TCP/IP Settings
9.4.4 E-mail Environment Setup
9.5 Scanner Feature Settings
9.5.1 Scanner Feature Overview
9.5.2 E-mail Settings
9.5.3 Scan to Folder Settings
9.5.4 Job Template
9.5.5 Scan to PC Settings
9.5.6 Job Flow Service Settings
9.6 Internet Fax Settings
9.6.1 Internet Fax Overview
9.6.2 Enabling Ports and TCP/IP Settings
9.6.3 E-mail Environment Setup
9.6.4 Internet Fax Test
9.7 Communication Security Features Settings
9.7.1 Communication Security Features Overview
9.7.2 HTTP Transmission Encryption Settings
9.7.3 E-mail Encryption/Digital Signature Settings

Number of pages: 1974.

DC fuji Xerox ApeosPortIV C5570 C4470 C3370 C2270 Xerox DocuCentreIV C5570 C4470 C3370 C2270 5570 4470 3370 2270 Xerox DocuCentreIV 5570 4470 3370 2270 DC-IVC5570 DC-IVC4470 DC-IVC3370 DC-IVC2270 AP-IVC5570 AP-IVC4470 AP-IVC3370 AP-IVC2270